This Kaiser semi-custom boat cover is made from 8.1oz/600d/ 600 denier marine grade polyester.
600d is an indirect measurement of density and weight. The higher the number, the heavier, thicker, and heavier duty. This is the thickest cover you will find. You will see a lot of 300d, even 150d covers, which are proportionally half as thick and 1/4 as thick as our covers.
With Solution Dyed fabric, the color is added to the liquid polymer before it is extruded into yarn. Therefore, it is inherent in the fiber and there is no dye or water waste. Because the color is impregnated throughout the fabric, these materials have excellent UV resistance to color fade. Solution Dyed fabric also has excellent abrasion, superior color consistency, superior crocking results, vibrant colors and superior everyday cleanability.
The fabric we use is coated twice with polyurethane on the bottom or downside, UV protected, and mildew protected.
The material of this cover is heavy duty enough to support towing speed up to 100km/h. This particular unit is "Styled to fit" Centre / Side Console boat (not T-Top) with bow rails up to 350mm height and console up to 800mm height from gunwale that is between 21.7 and 22.6 ft long, with a maximum beam of 102".
How to measure your boat for a boat cover
- Measure the length using a straight measurement from bow to stern (including bow rail).
- Measure the beam width across the widest point of the boat. Material has some stretch to conform to boat shape.
The actual length of this cover is 7.89m and its actual width is 3.82m.