Product Description
DuraPoly Boat Cover Range: Unmatched Protection and Durability
Introducing the DuraPoly Boat Cover Range, the ultimate protection for your boat. These covers are designed with meticulous attention to detail and crafted from the 600 Denier 100% Solution Dyed Oxford Polyester fabric.
Solution-dyed fabrics are dyed at the fiber level, meaning the color goes all the way through the material. This makes them much more resistant to fading from the sun and other elements. They are also more durable and less likely to tear, rip, or fray, even after prolonged exposure to the elements.
DuraPoly Boat Covers offer exceptional water resistance with 1500mm water column rating and waterproof strip on seams to keep your boat dry. Air vents ensure proper ventilation and prevent moisture from accumulating underneath. This new fabric is engineered with an extra UV inhibitor to extend its lifespan and protect the boat from the sun's damaging UV rays.
Each cover features a reinforced sewn-in rope for a snug fit and double-stitched interlock seams with "rot-proof" thread for added durability. They are trailerable for highway towing when properly tied down and easy to install and remove with quick-release buckles and adjustable heavy-duty straps.
The DuraPoly Boat Cover Range is the perfect solution for protecting your boat during storage or transport. With a life expectancy up to 4 years in Australia, you can be confident that your boat will be well-protected for years to come.
This particular unit is "Styled to fit" boat with Bimini Top, Hard Top, T-Top with or without Rocket Launcher.
Benefits:
- Protects your boat from the elements, including water, rain, snow, sun, UV rays, dust, dirt, debris, bird droppings, and more
- Keeps your boat clean and dry, even when stored outdoors
- Extends the lifespan of your boat's upholstery and finish
- Add value to your boat
- Enjoy peace of mind knowing that your boat is well-protected
| Cover Size (A) | Fabric Length (B) | Fabric Width (C) | Maximum Height from gunwale |
| 15-17ft 4.60-5.20m length - 96" 2.44m Beam | 730cm | 490cm | 135cm |
| 17-19ft 5.20-5.80m length - 96" 2.44m Beam | 810cm | 500cm | 135cm |
| 19-21ft 5.80-6.40m length - 96" 2.44m Beam | 850cm | 500cm | 135cm |
| 21-23ft 6.40-7.00m length - 104" 2.64m Beam | 900cm | 540cm | 135cm |
| 23-25ft 7.00-7.60m length - 104" 2.64m Beam | 940cm | 570cm | 150cm |
| 25-27ft 7.60-8.20m length - 104" 2.64m Beam | 1000cm | 600cm | 150cm |
| 27-29ft 8.20-8.80m length - 104" 2.64m Beam | 1060cm | 650cm | 150cm |
How to measure your boat for a cover
The simplest way is to measure the centreline and beam of your boat to find the size of cover (A) you need.
- Measure your boat's centerline length (straight measurement from bow to stern).
- Measure your boat's beam (the flat width of the boat at its widest point usually near mid-ship).
It is also recommended to cross check the actual fabric length (B) and fabric width (C) needed to make sure you have chosen the correct size.
- Measure along the length of your boat, over the top of any boat fittings e.g. bow rails, handrails, cabin, windscreens etc. to the point on the hull where the cover’s hem will finish.
- Measure across the widest point of your boat, over the top of any boat fittings e.g. bow rails, handrails, cabin, windscreens etc.to the point on the hull where the cover’s hem will finish.
| Weight | 240 g/m2 |
| Material | 100% High Tech Solution Dyed Polyester |
| Water Column | ≥ 150 mbar (1500 mm) |
| Light & Weather Fastness | Note 6-7 |
| Tensile Strength | ≈ 2200 N¹ | 1400 N² |
| Elongation | ≈ 40 %¹ | 30 %² |
| Colour Fastness to rubbing | Note 4-5³ | Note 44 |
| Chlorine Resistant | Note 4-5 |
| Water Repellency | Note 100 |
| Oil Repellency | Note 4 |
| Coating | Polyurethan [PU] |
| UV Protection Factor | UPF 50+ (measured value > UPF 80) |